​Different Fire Prevention Systems to Have in a Building

​Different Fire Prevention Systems to Have in a Building

Posted by Best Access Doors on 13th Jan 2021

Every commercial building should guarantee that the people inside are safe at all times. However, building owners now have to face the question of how to ensure building safety. If you're looking for ideas on how to improve building safety, then you have stumbled on the right article. Take note, however, that there are many kinds of safety features found in buildings. One particular system a building should have is a fire prevention system. Throughout the years, commercial buildings have experienced building fires, resulting in hefty damages and repairs.

If you plan to construct a commercial building, you need to know different fire prevention systems. Learning about them will help you know which fire prevention systems are essential for your facility. Every system you add to your building will grant more protection from possible building fires in the long run.

Dry-Pipe

This type of fire prevention system has automatic sprinklers connected to a piping system filled with pressurized nitrogen or air. During a building fire, the nitrogen-filled piping system gets dispersed throughout the sprinklers triggered by the fire. Some commercial buildings prefer to have the dry-pipe over the wet-pipe because the former does not freeze up compared to the latter.

Wet-Pipe

The wet-pipe system also has the same piping system as the dry-pipe system. However, this system uses a water supply instead of pressurized nitrogen or air. When there's a fire happening inside the building, the water will quickly discharge from the sprinklers through heat sensors. The sprinklers will only engage when it detects a fire, so the entire system will not turn on, leaving other areas without fire untouched.

Dry Chemical Fire Suppression System

If you need a fire suppression system that detects a fire before it even happens, the dry chemical fire suppression system is a must-have for your building. This system is excellent to have because it can protect both the lives and reduce building damage. You do not need to spend a large sum of money to repair a small area inside the building. Generally, you can pair the system with a good heat or fire detection system to make the fire suppression system more efficient.

Inert Gas Fire Suppression System

This system uses carbon dioxide by removing oxygen from the burning area to prevent the fire from combusting even further. Inert gas is relatively safe for small spaces and areas within the building as opposed to carbon dioxide. People close to an engaged inert gas fire suppression system won't suffocate from the fire suppression agent. You can find several benefits with this fire suppression system, such as building equipment getting undamaged and entirely safe for the environment.

Foam Fire Suppression System

The foam fire suppression system comprises three parts, which are air, water, and foam concentrate. Each of these parts makes the fire suppression more effective and can extinguish and control fire faster. Whether it's a fire that started from combustible solid or liquid, you can best bet the foam can eliminate the fire as quickly as possible.

Apart from fire suppression systems, you can add more fire safety features by adding fire-rated access doors and panels to efficiently protect building components when a fire occurs within the building. Make sure to get your fire-rated access doors and panels from Best Access Doors!