10" x 10" - 2 Hour Fire-Rated Un-Insulated Surface Mount Access Door

Product Spec Sheet:

10" x 10" - 2 Hour Fire-Rated Un-Insulated Surface Mount Access Door

Introducing the FDU2RS fire-rated access door that is designed to maintain the continuity of a fire barrier when installed in a vertical separation. This unit is manufactured under the factory inspection service of Best Access Doors. It has a label reading “Listed access frame and fire door assembly, 2-hour fire-rating. It has an automatic panel closer that will close and latch the door from an open position of approximately 90° as required by code.

Materials: Satin nish galvanized (bonderized) steel
Frame: 161mm (16ga)
Frame Depth: “D” = 16mm (5/8”) [Overall Dimension = 13/16”]
Flange: 37mm (17/16”) exterior -ange
Door Panel: 161mm (16ga)
Finishes: The paint nish is an electrostatically applied rust inhibitive prime coat (off-white)
Hinges: Continuous piano hinge.
Panel Closer: The automatic panel closer will close and latch the door from an open position of approximate-ly 90° as required by code.
Latch: The standard factory installed latch is a -ush mount 1/4” allen key. All re-rated locks are self-latching and include an interior latch
release mechanism allowing the doors to be opened from the inside.

Product video

Product Video

 

 

 

View this post on Instagram

A post shared by Best Access Doors (@bestaccessdoors) on Oct 12, 2017 at 8:25am PDT